Info
The Info-P series readers are suitable for Switch2 and Net2 systems.
Installation
Compact readers have a wire pair for controlling the electric strike and a wire pair for the power supply. An exit button is optionally connected to the third wire pair. All wire pairs are led out of the reader at the center back. This facilitates precise installation. Installation on metal surfaces and in the immediate vicinity of other contactless readers should be avoided, as the reading range is impaired in these cases. After installation, the group start card is used and all transponders and cards from the set are immediately valid. Done!
Operation
After installation, the user transponders are immediately valid and ready for use. Each user transponder is supplied with a corresponding delete card. When a user transponder is issued, it is issued to the user and his name is written on the corresponding delete card. If a missing user transponder is to be blocked, the corresponding delete card is simply applied to the reader. This simple procedure invalidates the transponder. Another transponder can then be issued to the user.
Further functions are programmed with PROXIMITY programming cards for additional functions. This includes, for example, the creation of access areas.
Technical data
- Compact system with integrated control unit
- With light and dark cover cap
- Can be used in conjunction with PROXIMITY transponder sets
- Up to 100 PROXIMITY sets can be stored (i.e. 10,000 users with sets of 100)
- Door release time: 1 to 60 seconds
- With 3 m connection cable
- Protection class according to IP67
- Current consumption: max. 100 mA
- Max. permissible current consumption of the electric strike: 1A
- Reading range: approx. 35 - 80 mm (depending on transponder type)
- Operating temperature range: -20 to +55 °C
- Operating voltage: 12 V DC
- Dimensions (W x H x D): 50 x 100 x 15 mm
