Info
Entry is a door intercom system for operation as a standalone device or in conjunction with the Net2 and Paxton10 access control solutions from Paxton. An external door station component of the Entry door intercom system. This variant of the door station can open up opportunities in locations where vandal resistance (VR) is a requirement. The VR door station has a market leading impact resistance rating of IK10 and is manufactured from marine grade stainless steel to suit the most demanding environments.
All Entry door stations are IPX5 certified, making them suitable for external use in all weather conditions.
Installation
Entry components can be easily connected using Cat5 or standard RJ45 patch cables. Entry can also use an existing network infrastructure for easy installation. As power and data are supplied via PoE over the same cable, a separate power supply is not required.
With this door station model for flush mounting, the device is flush-mounted in the wall. If there are several entrances with a door station, more than one door station can be assigned to an access control unit (ACU).
A secondary IP camera can also be installed and integrated into the entry system to provide additional security for areas that are difficult to see. This offers more flexibility, as it is possible to switch back and forth between the two cameras on the Entry Monitor.
Operation
A visitor starts a video call via the bell button on the external door station. Access can be granted to the visitor via the Entry Monitor with its intuitive touchscreen user interface. The internal monitor can be used either via the handset (for private calls) or in hands-free mode.
When connected to Net2, access to the building is activated by entering a PIN or code and/or using a proximity transponder. When connected to Paxton10, access to the building is activated via Bluetooth® smart credentials, PIN or code entry and/or with a proximity transponder.
Technical data
- Entry door station made of stainless steel for flush-mounted installation
- Made of corrosion-resistant stainless steel (AISI 314 - V4A)
- Degree of impact resistance IK10
- Up to 100 door stations in one system
- Compatible with Net2 and Paxton10
- With integrated contactless reader
- For Paxton and EM4100/02 transponders (125 kHz)
- For Mifare transponders Classic 1K and 4K, DESfire, DESfire EV1, Plus, Ultralight/C, Mini (13.56 MHz)
- Reading range: 10 - 55 mm (depending on transponder type)
- Numeric keypad can be used for granting access via PIN or code
- Dual audio system
- Digital color camera, resolution VGA 640 x 480
- angle and inclination can be adjusted in three stages via Entry Configuration Utility
- Camera - Max. Max. angle of inclination. 60° - Max. Max. tilt angle: 90° (per level: tilt 40° / tilt 60°)
- Three-line LCD display
- Infrared LEDs for night light, adjustable: Always on, Always off, On at dusk
- Imitation of a buzzer when using direct current door openers
- Power supply via PoE (max. 12.95 watts - IEEE 802.3 af
- Self-detecting in the network thanks to IPv6 technology
- Ethernet bandwidth - during a call: 100 kb/s - 1 Mb/s
- Connection via RJ45 connector included in the scope of delivery
- Protection class: IP55
- Operating temperature range: -20 to 55 °C
- External dimensions (W x H x D): 150 x 336 x 45 mm
- Installation dimensions (W x H x D): 111 x 296 x 39 mm
